Gain

12 dB

Inputs

• 3 sets RCA line input
• 2 sets balanced/RCA selectable inputs
• set RCA cinema bypass input
• Optional 1 MM and 1 MC (or additional line input if phono is not fitted)

Outputs

• 2 sets RCA
• 2 sets balanced XLR (EIA “pin 2 hot” studio standard)

Tubes

2x 12AU7 
2x 8416, 7308, 6922, E88CC, ECC88, 6DJ8, (or 12DJ8 twin triodes)

Absolute Phase

correct from all inputs to all outputs

Frequency Response

Flat over audio band
–3 dB bandwidth 5 Hz – 210 kHz

THD

<0.009% @ 1 kHz, 1 V RMS

Maximum Output

> 8 V RMS

Output Impedance

< 150 ohms, 20 Hz - 20 kHz, static (i.e., not dependent upon feedback)

Maximum Input

Infinite signal (attenuation precedes the gain circuitry)

Recommended Output Load

> 300 ohms

Power

External power supply, detachable umbilical cable, detachable IEC power cord

Cinema Bypass

Yes

Voltage

May be ordered for 100v, 120v, 220v, or 230/240v operation

Remote Control

included

Illumination

Illuminated logo may be switched off

Finish

Hand-rubbed gold-flake gloss black lacquer with chrome knobs standard.

Hand-rubbed metallic gloss silver lacquer with chrome knobs special order with additional cost.

Warranty

Two years parts and labor, excluding tubes (USA, see manual for full details)

Dimensions (H x W x D)

Audio chassis (not including knobs and connectors): 5.5" x 18" x 14.5" (14 cm x 45.7 cm x 36.8 cm)

Power supply (not including connectors): 4.3" x 18" x 14.5" (10.9 cm x 45.7 cm x 36.8 cm)

Shipping Weight

With phono: 61 lbs. (27.7 kg.)

Tubes

6x 12AX7

Gain

44 dB MM
64 dB MC

Frequency Response

RIAA standard +/- 0.2 dB (20 Hz - 20 kHz)
-3 dB bandwidth 10 Hz - • 80 kHz

Channel Seperation

> 80 dB @ 1 kHz

Maximum Input

> 130 mv @ 1 kHz, MM
> 13 mv, MC

MC Load Impedance

selectable, 470, 300, 250, 200, 150, and 100 ohms

MM Load Impedance

selectable, 47k, 30k, 25k, 15k, and 10k ohms

Overload

117MV @ 1kHz = 8 volts RMS output; 460MV @ 10kHz

Residual Noise

Less than 3MV at output (s/n ratio greater than approx. 69db